Specifications︰ Auto Dialing Motion Detector

This is a very unique security product. It is a motion sensor that you can set-up anywhere in your house or office and carry with you .the system is connected to a telephone line. If someone triggers the motion sensor, it will emit radio signal to the system, and the system will automatically dial the preprogrammed numbers of a telephone, mobiles phone or pager. This is the best system for protecting your home, office, or store. It is easy to install or relocate. Just plug and play. . They can be used in any part of home and emergency call for help for the elderly. It's completely wireless!
Very convenient to use in daily life!
Auto dialing motion detector only
---- one telephone alarming controller
-----2 remote controls
But It can work with extra INFRA Red Unit and the extra Wireless Magnetic detector
-------------------------------------
The device has two-telephone jock (two are the same), one jock connects to line, anther to phone, when the AC adaptor (220V) set to the power jock, the system will auto-start, a sound will be hear from the system. If you pick up phone, you will hear a dial sound come from the line, you can be able to dial phone number as before. That is ok!
1 .to program phone number into the system, push the button on the system until two sound come from the system, then, pick up the phone, do not mind the any sound come from the line, you can dial: 1 # - - - - - #; 2 # - - - - #; --; 9 # - - - - #, (when you dial any number, there is a whisper, that is say the number has been saved into the system, when you end the one group phone number after #, a longer whisper will be hear. You can program 9 group phone number into the system .If you wand to change the phone number in the any group, please redo it as above.)
2. Two of the remote controller have set into the system, you don¡¯t need to set again, but if you want to set, you can do as this: dial the number 1* , then, push the emergency button (C) on the first remote controller, the system will send out a whisper, and dial the number 2* , then, push the emergency button (C) on the second remote controller, the system will send out a whisper also.
3. When you dial the number 0 * 2, the system is set to be first sound out 15 second voice alarm, then redial the phone number set in the system, group 1 to 9, (If you have set to). Two times in turn. This has enough time for you to decide that it is needed to dial or not; when you dial the number 0 * 1, the system is set to be first redial the phone number set in the system, then sound out 15 second voice alarm, also two times in turn. This is for the emergency call.
4. When you end the system set, Please push the button on the system, a sound will be hear from the system. Then, Put down the phone.
5, Emergency button in the base, when something happen suddenly, you can push the emergency button in the base (one second), the system will make the call for you at once.
6. The remote controller has four buttons; one of them can make an emergency call.