| Specifications︰ | 1,telephone alarming controller
2,inactive infrared intruding detector
3, radio detector, remote controller
4, have 10 group dialing ( two time in turn), voice alarm and live monitor
5, remote control and emergency alarm
---------------------------
FOB prices (for minimum order quantity)---------22 usd
Minimum order quantity--------------------------100 set
Sample availability/cost------------------------35 for ten set /each
International standards met---------------------ok
Delivery time-----------------------------------20 day
----------------------------------
) The Alarm to phone consists of
a) telephone alarming controller + infra red intruder (both in one box)
b) 2 remote controlls
c) connected 220v AC cable, with AC plug
d) connected telephone wire, with telephone plug.
e) connected a thin white wire that is hanging outside the unit.
WHAT IS THE USE OF THIS THIN WHITE WIRE ?---------------it is used as anneas to resive the remote controlls sigals
f)The unit also has a red hidden knobe.
WHAT IS THE USE OF THIS RED HIDDEN KNOB ?
WHAT HAPPENS IF IT IS PRESSED IN ?----------------------- for normal use
WHAT HAPPENS IF IT IS PRESSED OUT ?------------when you want to program the phone number in it
g) instructions
HOW WE ENTER THE PHONE NUMBERS TO DIAL ? ------------------ when a red hidden knobe is pressed out,and the line (from unit) link to phone,put to power supply,and pick up the phone,now you can program it:
1 .to program phone number into the system
you can dial: 1 # - - - - - #; 2 # - - - - #; ¡¡ 9 # - - - - #, (when you dial any number, there is a whisper, that is say the number has been saved into the system, when you end the one group phone number after #, a longer whisper will be hear. You can program 9 group phone number into the system .If you wand to change the phone number in the any group, please redo it as above.)
2. Two of the remote controller have set into the system, you don¡¯t need to set again, but if you want to set, you can do as this: dial the number 1 * , then, push the emergency button (C) on the first remote controller, the system will send out a whisper, and dial the number 2 * , then, push the emergency button (C) on the second remote controller, the system will send out a whisper also.
3. When you dial the number 0 * 2, the system is set to be first sound out 15 second voice alarm, then redial the phone number set in the system, group 1 to 9, (If you have set to). Two times in turn. This has enough time for you to decide that it is needed to dial or not; when you dial the number 0 * 1, the system is set to be first redial the phone number set in the system, then sound out 15 second voice alarm, also two times in turn. This is for the emergency call.
4. When you end the system set, Please push the red button in ,. Then, .the line (from unit) link to phone line ,after 15 second ,you can test the
infra red intruder work .
5 . The remote controller has four buttons; one of them can make an emergency call.
note: when first time power on,the system will waitting for you to program the phone numbler, if you not do this again,please wait 30 secend ,then you can test it.
HOW WE CAN DEACTIVATE THE SIREN SO ONLY DIAL TO
OCCUR IF ALARM IS ACTIVATED ?----------------------- use the remote controller to interrupt it.
|
|
|
Product Image
|
