| Advantages︰ | you can send SMS to control 7 Relay open or clouse.the Relay used for 230V10A .
SMS remote control relay switch method
1,Send SMS：
（0）123456#0#；check the 8 road relay on or off state.
（1）123456#1#1#；close the first road relay immediately when received SMS.
123456#1#0#；open the first road relay immediately when received SMS.
123456#2#1#；close the second road relay immediately when received SMS.
123456#2#0#；open the second road relay immediately when received SMS.
……（an so on, control to the third to seven relay action） （2）123456#1#1#0915#1630#；
The first relay close automaticly every day (strat 9:15 and end 16:30).
123456#1#0#0915#1630#；
The first relay open automaticly every day (strat 9:15 and end 16:30).
123456#2#1#0800#2230#；
The second relay close automaticly every day (strat 8:00 and end 22:30).
123456#2#0#0800#2230#；
The second relay open automaticly every day (strat 8:00 and end 22:30).
……（an so on, control to the third to seven relay action） （3）123456#8#1#；all relays close immediately when received SMS.
123456#8#0#；all relays open immediately when received SMS.
（4）123456#9#1357#246#；
relays of 1,3,5,7 close and relays of 2,4,6 open immediately when received SMS.
123456#9#246#1357#；
relays of 2,4,6 close and relays of 1,3,5,7 open immediately when received SMS.
（5）123456#10#123456#；Change the password (1—6 bit)
2, Port connection:
1-1==first Relay, 2-2==second Relay, an so on
3, state led
(1)orange flashing: connection network state
(2) green flash: normal status
(3) red light: answer the SMS
4,briefly the operating instructions:
(1) first inset SIM card (orange lights flash), waiting for the lights flashing.if failure, check SIM card.
(2) Restore the factory Settings: push down the reset button on the board then start the power, led are red state for a while show reset is success, he password is 123456
|
|
|
Product Image
|
